• sns01
  • sns03
  • sns04
Sitsalele umnxeba: 86-17398029827
English
iphepha_ibhena

iimveliso

Lawula ukukhululwa kwe-additive / Anchorage additive

Lawula ukukhululwa kwe-additive / Anchorage additive Featured Image
  • Lawula ukukhululwa kwe-additive / Anchorage additive

inkcazelo emfutshane:

Siemtcoat®,Isilungisi samandla okukhutshwa okuphantsi kwenkqubo yokwaleka yokukhulula.Yipolymer esebenzayo ye-silicone enokunciphisa amandla okukhululwa ngedosi eyahlukileyo kwinkqubo.Iingubo ze-silicone ezisebenzayo eziphezulu kunye nezongezo zizisa iipropati ezikhethekileyo kwiphepha eligqunyiweyo kunye nefilimu yesicelo sobugcisa.Ukukhutshwa kwe-silicone yokukhutshwa kwephepha kunye neefilimu sisisombululo esifanelekileyo sokukhusela izixhobo zakho zokuzincamathela kwaye zibonelela ngokusebenza okuphezulu okungabambekiyo kwinani lezicelo.


Iinkcukacha zeMveliso

Iithegi zeMveliso

Isicelo

I-LRA-2 luyilo olukhethekileyo lokuthoba amandla okukhululwa emva kokuba ukhupho lucolile.Inokuthi idibanise ukukhulula inkqubo yokugqoka (zombini isiseko se-solvent okanye inkqubo ye-solventless) ngexesha lenkqubo yokuxuba.Emva kokuphiliswa, kunokufezekiswa amandla aphantsi okukhululwa kunye nefuthe eliphantsi kwi-adhesive elandelayo.Esi silungisi sinokuba luncedo kudidi olwahlukileyo lokuncamathelisa.

Isicelo

I-SF 300 luyilo olukhethekileyo lwe-Glassine PEK, CCK njl njl. I-Substrate coating.I-dosage yecandelo elihlukeneyo kufuneka ilungelelaniswe isiseko kwimeko yenkqubo eyahlukeneyo kunye nesicelo.Emva kwezixhobo ezixubeneyo, ukugquma kumphezulu we-substrate ukunyanga kunye nokufezekisa iprofayili ekujoliswe kuyo.

Inzuzo

● Isihlomelo esisebenzayo esisezantsi sokukhulula

● Ukufuduka kwe-silicone ephantsi

● Ilungele uhlobo oluhlukeneyo lwenkqubo yokuncamathelisa.

Iipropati

Isiqhelo   SiemtCoat®I-LRA-2  
Imbonakalo Ulwelo olululwelo olucacileyo okanye oluncinci
Iyasebenza %

100

Vis (mPa.s @ 25°C)

160

Indawo edanyazayo(°C, vala ikomityi)

＞300

Uxinaniso(g/cm3)

0.99

Iyaqhuba

Xa ufaka isicelo se-LRA-2 kwinkqubo ye-Siemtcoat, nceda ulandele umlinganiselo ophantsi kunye nenkqubo yokuxuba:
  1. Ubunzima bepolymer ephambili

100p
  1. Ubunzima obuphantsi bokukhululwa kwamandla okongeza i-LRA-2 isiseko kwimfuno ye-0.5-4p
  2. Xuba idibansi ngokulinganayo
  1. Ubunzima be-crosslinker
 0.5-5p
  1. Xuba i-crosslinker kwaye uqiniseke ukuba i-dispenser kakuhle
  2. Ubunzima be-catalyst Siemtcoat 5000 kwaye udibanise ngexesha lokuxuba i-0.7-2p
Ingqalelo:musa ukuxuba i-crosslinker kunye ne-catalyst ngqo njengoko ukusabela okumangalisayo kuya kwenzeka
  1. Xuba de i-catalyst ilingane

Ingcaciso eneenkcukacha inokuqhagamshelana nathi ngengcebiso yoqulunqo.

Iphakheji

Ubunzima beNet 20kg ngegubu ngalinye okanye 1kg ngebhotile.

Okanye ngokwemfuno yomthengi.

Beka ubomi kwishelufa

Kufuneka igcinwe kwisikhongozeli esivaliweyo ku -20°C ukuya +30°C.

Ubomi beshelufa eqhelekileyo ziinyanga ezingama-24.Usuku oluphelelweyo luphawulwe kwileyibhile yegubu ngalinye.

  • Ngaphambili:
  • Okulandelayo:

    • EyeleleneyoIimveliso

    Cofa u-enter ukukhangela okanye i-ESC ukuvala